How to Attach a Moldboard Plow to Your Lawn Mower

moldboard plow is a device that uses a cutting blade to cut through the soil, which is then raked by one part, which looks more like a wedge. This turns the land over, performing the function of the plow while allowing you to operate a lawnmower or other similar driving device. Adding a plow to your lawn mower means that you can move the soil much more efficiently, without having to do a lot of hard work to get the result. If you are looking for a way to improve your gardening ability, then a moldboard plow is one way to achieve it. The plow can be easily attached to most types of mowers.

Step 1 – Find the attachment

Your mower is designed to have a number of accessories installed, and if you have a modern model, then on the back of the mower you should expect to see a small square box with several D-ring connections. This box also usually has a large screw on it. the upper part, which can be moved up and down. To fit your moldboard plow to your lawn mower, you will need to examine the plow and decide if you will be able to insert it into the square box.

 

Step 2: installing the plow in the box

If you have the correct end for your plow, you can install it on the mower quickly and easily. Unscrew the top of the bolt, either by unscrewing it with a screwdriver or using a wrench to remove it. The moldboard plow should be moved to the center of the square and pushed until it reaches one of the holes. How close you want the plow to sink into the ground will affect which of the holes you connect to the mower. Once the end of the plow is pushed in, you can push the screw down through the square. This may take some time as you will need to line up the holes correctly. Screw in the wrench as tightly as possible to hold the bolt in position.

Step 3 – Fixing the moldboard plow

If your plow does not fit in this box, you will need to connect it to the rings along the side. This is usually done with a series of chains that are attached to the rings and hooks on the sides of the mower. Just grab the chains and push your plow to the designed position. Attach the chain to the rings with a spring clip, usually supplied with the chains. You should then be able to connect the other chains to hooks along the side of the mower. This will help keep the moldboard plow from moving, and as long as the chains are tight enough, the plow should move in a straight line.

Leave a Comment