[ 2020 Reviews ] 8 Best Chainsaws For Farm Use

When there is work to be done, such as cutting wood and pruning trees, the chainsaw is a fundamental tool. Of course, it must be used with extreme skill as it is potentially dangerous: the attention must be maximum and, if you do not feel it, you should turn to a professional. If, on the other hand, you feel ready and sufficiently skilled, it is good to think about which type of chainsaw is most suitable for you.

 We have chosen some of the best chainsaws for farm use; we immediately propose two models that anticipate our selection: Stihl MS 193 is suitable for pruning, and we liked it for its manageability. The same can be said for Husqvarna T 435. It is also suitable for pruning, has a good balance and not bad power.

 

The 8 Best chainsaws for farm use- 2020 Ranking

Take a look at the chainsaws that we have chosen for you. You find them sorted according to a ranking. To learn more about the characteristics of each, please read the review carefully. We have taken note of the opinions expressed by other consumers, and we have treasured them to present our conclusions to you. When choosing your new chainsaw model among those sold online, don’t forget to compare the prices.

 

Rank #1: Stihl MS 193 Chainsaw, 35 cm, 3 / 8P1.3

The Stihl chainsaw that we offer is designed primarily for pruning. In making it, the manufacturer managed to combine the low weight with power. Therefore his strength does not have an imprecise cut as the reverse of the coin. It is ideal for those who have their first experience with such a tool because it is easy to handle and balanced.

Consumption (it is fueled by petrol) is not excessive. Therefore there is also a saving on operating costs. When you are going to buy a chainsaw, you must always pay attention to the vibrations, and we must say that you are not disappointed, they are minimal and tolerable. The handle is ergonomic and comfortable. By taking a closer look at the materials and, in particular, their quality, we believe we can express a positive opinion.

We asked ourselves if this saw was suitable for professional use, and the answer is yes, even if we reiterate it, it is a tool to be used mainly for pruning, not for felling trees or sawing large sections of logs. The only flaw that we report is the noise.

 

Pros

Handy:

The chainsaw is particularly suitable for those who have not yet experienced such a tool as light and easy to handle.

Consumption:

We have found that fuel consumption is contained. Therefore there is a saving in this sense.

Handle:

The chainsaw offers a very comfortable ergonomic handle, furthermore the reduced vibrations make it easier to hold it.

 

Cons

Noisy:

There are no major defects to report except that it is a noisy tool when it is put into operation, and the blade sinks.

 

Rank #2: Husqvarna T 435 AMZ Professional Chainsaw

The Husqvarna T 435 chainsaw is for pruning. Its lightness and good power are immediately striking. Well balanced, it is also suitable for those with little experience with tools of this type. Not bad consumption, which also involves low polluting emissions.

This model, which is among the best selling, respects the environmental standards valid worldwide. The setting of the chain lubrication is very intuitive, thanks to the adjustable oil pump. The air filter is very simple to clean and is quick-release, while with the chain tensioner, it favors the quick and simple tension of the chain.

The vibrations are very low, and the quality of the materials is satisfactory. There have been very few complaints about this chainsaw, in particular, Husqvarna criticizes itself for the insufficient instructions provided; the greatest difficulties arose for the assembly of the blade and chain.


Pros

Light:

The low weight has been warmly welcomed by customers: a feature of this kind is fundamental especially for the less experienced

Lubrication:

The system for setting the chain lubrication was judged as very simple and convenient by users.

Vibrations:

Another positive aspect found for the chainsaw regards the vibrations, which are reduced thanks to an efficient contrast system.

 

Cons

Instructions:

Husqvarna should have been concerned with providing clearer and more detailed instructions: many users have found it difficult due to this lack.

 

Rank #3: Makita UC3041A Electric Chainsaw 30cm

For non-professional use, we suggest taking a closer look at what the well-known Makita brand has to offer. The UC3041A is an electric chainsaw equipped with a 30 cm bar. Its power is 1,800 W, enough for small jobs like sawing firewood or pruning some orchard trees.

It is very light, and the vibrations have a minimal incidence. Even those who are at the first experience will have no difficulty handling it. In this, great help comes not only from the low weight but also from the excellent ergonomic handle with soft grip. To tension the chain, it is not necessary to use tools, but at the same time, we must emphasize that more customers complain of a fast breakage of the chain tensioner.

The price is low, which is certainly positive, but by this, it has been spared on materials whose quality leaves a little to be desired.


Pros

Handle:

The chainsaw boasts a very comfortable handle with soft grip coating. The grip is secure, firm.

Light:

Its low weight facilitates the work as it gets less tired, plus lightness is an even more important feature if the chainsaw is in inexperienced hands.

 

Cons

Materials:

We cannot say that Makita has made the best materials available to consumers; there is a bit of disappointment.

Chain tensioner:

Judging by the many complaints, the chain tensioner seems to be the real Achilles heel of this chainsaw: too many people it has broken.

 

Rank #4: Black + Decker GKC1825L20-QW Lithium battery electric chainsaw

Black + Decker offers a battery-powered chainsaw for pruning jobs, or rather, for small pruning jobs, considering the reduced autonomy of the 18 V battery and the low power. Just the battery life has been a source of criticism from the less satisfied customers expected to work beyond the 15/20 minutes that allows full charging. We also report the absence of the charger.

 The use is comfortable thanks to the ergonomic design and low weight. The handle is also well made. The weight is distributed optimally, so there is less fatigue. The system for tensioning the chain is satisfactory: no tools are needed, just use the appropriate knob located on the side.

Lubrication is also easy: just a little pressure on the oil tank cap. Safety is maximum: there are a double start switch and an anti-kickback system.

 

Pros

Comfort:

The use of the Black + Decker chainsaw is very comfortable thanks to the low weight, among other things, well-distributed and ergonomic design.

Chain tensioner:

The system for tensioning the chain is very practical and does not require the use of tools: just turn a knob.

 

Cons

Battery life:

It disappoints that of the battery, which, according to what consumers have declared, does not go beyond 15 or 20 minutes; also, the charger is not included.

Power:

Do not expect great power from the electric saw in question. Many users said they were quite disappointed because they expected something more.

 

Rank #5: Alpina 292614000/11 Chainsaw, 1800 W, Yellow

The Alpina morosaw surprised more than one customer. Its performance went beyond expectations. For example, some doubted the cutting capacity, fearing even low power. Instead, they had to change their minds.

It is clear that it remains an electric saw for occasional use, absolutely unprofessional, so much so that one of the problems that arise most often concerns the chain tension that loosens several times during work. We recommend it especially for pruning or cutting firewood. The maintenance required is minimal, but attention to the oil level because this model consumes a lot.

This is another of the defects that we found together with the brake bar deemed too harsh by users. For the rest, we are talking about a light, handy tool, perhaps with far too much plastic, but also sold at an attractive price. The quality of the cut is good, and the noise is minimal.

 

Pros

Price:

It is a very economical electric saw, many users have chosen it for this reason, and they have not been disappointed with the purchase.

Handy:

The low weight means that the electric saw is very easy to handle: you don’t get tired and therefore you can work quickly.

 

Cons

Chain tensioner:

The system for tensioning the chain must be reviewed: it loosens all too often, forcing you to stop working to bring it back under tension.

Oil consumption:

Users believe that oil consumption is excessive, and this forces them to check the level often and willingly.

 

RANK#6:Echo CS 310 ES Professional petrol chainsaw

We suggest taking a closer look at the Echo for a professional chainsaw at a pretty good price. It is a multipurpose tool so you can do a little bit of everything: sawing firewood, pruning, and so on. The performances are satisfactory, as evidenced by several customers who have not failed to express their good impressions received from the use of this chainsaw.

One of the strengths of the Echo chainsaw is certainly the manageability also favored by an excellent handle, which is not soft grip. The ease of use is the result, among other things, of the efficient anti-vibration system with which the CS 310 ES is equipped.

Good engine power with its 30.5 cm3 displacement. The quality of the cut is promoted. It is not light, dry weigh on 4 kg, which in the long run could tire, especially those who are less accustomed to handling such a tool.

 

Pros

Performing:

Those who have decided to buy the Echo chainsaw tell of excellent performance, the satisfaction with the purchase was maximum.

Manageable:

To highlight the manageability of this chainsaw, thanks to a good handle, which is still comfortable despite being without a soft grip.

Cut:

We have noticed the excellent cutting quality of this multi-purpose chainsaw, we are sure you will be satisfied.

 

Cons

Weight:

For some, especially those who do not have the necessary experience with such tools, the chainsaw could be heavy, considering its 4 kg dry weight.

 

Rank #7: Stihl MS 170 Internal Chainsaw 35 cm blade

The Stihl MS 170 chainsaw is a tool especially suitable for occasional use. Therefore it is aimed at those who take care of the green space surrounding the house. What has just been saying should not make you think of a toy, on the contrary. True, it is small but also powerful enough and, more generally, performing.

You will realize the goodness of the purchase after observing the clean and precise cut, without hesitation. The chainsaw then starts on the first try. You will not have the slightest difficulty in removing branches, pruning, and cutting firewood. It is a chainsaw balanced between weight and power; excellent balance as well as build quality.

Good news also on the consumption front, which is quite contained. Of course, it is not cheap, but we are still talking about a non-prohibitive figure and, above all, consistent with the general quality of the article.

 

Pros

Cut:

The quality of the cut made by the chainsaw is certainly to be appreciated: precise, clean, completed without hesitation.

Handy:

The excellent balance between weight and power and the compact dimensions, favor the manageability, a distinctive element of this model.

Start-up:

The chainsaw we offer you has an excellent start-up: it always starts on the first try, and this is a talent not to be underestimated.

 

Cons

Non-professional:

Net of good impressions and satisfactory performance remains a chainsaw to be used only for occasional use, inadequate for professionals.

 

Rank #8: Husqvarna 236 Chainsaw with 35 cm bar

The Husqvarna chainsaw is suitable for occasional use. Still, the performances do not disappoint, too bad they are not supported by better quality materials also because, as is known, Husqvarna does not give its products.

The engine is 38.2 cc for a power of 1.4 kW. It is heavy: dry, it is necessary to support 4.7 kg, then clearly the fuel weight must be added. As standard, it mounts a 35 cm long cutting bar, but if desired, it can be replaced with a longer one.

A mixture powers it. As noted by some users, there is no indicator of the oil and fuel that would have been very convenient. It must be said that it consumes little. The grip is comfortable, and the tool starts the first time, as long as you follow the start-up procedure explained in the instructions.

 

Pros

Performance:

The performance of the chainsaw is very good, even if the claim is always intended for hobby use.

Consumption:

You can be satisfied with regards to consumption: with a full tank, a lot of work is done.

 

Cons

Heavy:

Before buying it, ask yourself if you can support and handle a chainsaw that weighs 4.7 kg when dry.

Indicator absent:

As some users have pointed out, there is no indicator for the oil and the mixture: the presence would have been very convenient

 

Guide to buy a chainsaw

Do you want to know where to buy the best chainsaws for farm use of 2020 at low prices? Here you will find several offers selected among the many available on the market. We have made a comparison between the best brand models, which are generally more expensive, with something cheaper but not of bad quality. Our selection meets the most common needs of consumers, that’s why we are sure that you will find the best possible chainsaw for you here.

 

Weight and power

When choosing a chainsaw, its weight must be taken into account. For those who buy for the first time, such a tool should take the lightest one possible because the lower the weight and the less difficult it is to handle the chainsaw. However, it is not always possible to find the right balance between weight and power. The latter affects weight.

The strength of the chainsaw cannot always be sacrificed in favor of greater manageability. In other words, the power must be adequate for the work to be done. It is clear that if you go to the woods to cut large trees, you will need more power than those who use the chainsaw to cut a few small trunks or prune a sapling.

Another thing not to underestimate is the vibrations; if they are excessive, they can cause physical discomfort and make work more tiring and stressful in the long run.

Balancing

To understand how to choose a good chainsaw, it is not enough to check the weight and power. A good chainsaw is also because it is well balanced, a fundamental condition for manageability. How do you understand if the chainsaw you like is balanced? Just make a quick and simple check: you must be able to change the way you grab the handle and avoid unbalancing yourself.

 

The type of engine

Many think that chainsaws are exclusive with internal combustion engines. Instead, there are also battery-powered ones. For those who work in the woods, there is no doubt about which chainsaw to buy, the one with an internal combustion engine. For the care of the garden or green space in general, a cordless chainsaw is better or, to be more precise with the terms, an electric chainsaw. In this case, we suggest having at least two batteries so that you do not have to interrupt your work according to the charging times.

To provide clearer information, we try to distinguish between the use of the chainsaw in the garden, therefore occasionally. For work, so in this case, we talk about intensive use. For occasional and undemanding use, you do not need a particularly powerful tool, which, moreover, costs even more. An engine with a displacement between 25 and 40 cubic centimeters is more than good. We also remember that a contained power also means a lighter and less demanding chainsaw to handle.

Those who use the chainsaw often, perhaps for professional purposes, should not drop below 50 cubic centimeters of engine capacity. For pruning, there are chainsaws designed precisely for this task, which have a handle at the top that allows better handling and a more precise cut.

 

Frequent questions

How to sharpen a chainsaw chain?

First of all, it is necessary to know that many manufacturers offer to sharpen templates to obtain better results. In any case, we start from the shorter cutting edge; all other cutting edges, once filed, must have the same length as the shortest, that is, the first cutting edge filed.

The template should be placed over the chain. If you pay attention, the template has arrows; these must be directed in the direction of the chain’s rotation. Using a round file (always hold it with both hands), but it at 90 ° concerning the template rollers, and perform uniform passes towards the outside.

Once this is done, file a tooth and skip two to obtain a perfect sharpening of the cutting edge; it is very important that all cutting edges are of the same length. Repeat the operation is sharpening the cutting edges from the opposite direction.

 

How to cut a tree without a chainsaw?

To cut down a tree without using a chainsaw, you have to resort to the hatchet. First of all, a sort of 45 ° angle must be obtained in the trunk on the side that is considered most appropriate to make the tree fall.

How to clean the chainsaw filter?

The air filter often gets dirty; therefore, it would be advisable to clean it after each use of the tool for the correct operation of the chainsaw. The best method involves using a compressor: a light pressure is blown on the filler, and the air is blown but with moderate power to avoid damaging the filter. In the case of air-resistant residual dirt, it can be removed with a small soft bristle brush.

How to cut a tree with a chainsaw?

A first cut is made on the side of the fall; the cut must form an angle of about 45 °. Once this is done, the second cut must be done on the opposite side. In the felling of a tree, nothing should be left to chance, that’s why the side of the fall should be chosen by evaluating the slope of the tree, the side where the crown protrudes most, the wind direction, and any inclination that characterizes the ground. It is advisable to tie a long rope to a branch on the side where you want to drop the tree to tug it. This applies to medium-sized trees, while for large ones, it is good to use the skills and means of a professional.

What to do when the chainsaw is flooded?

If the chainsaw gets jammed, there are two possible ways. The first is to wait a few hours. You will see that then it will start again. Rightly not everyone can waste time. In this case, the candle is dismantled and dried thoroughly. Before reinserting it, you have to give two or three pitches of rope, then put the candle back on.

 

How to use a chainsaw

 

The chainsaw is a tool to be used with extreme caution and skill, but there are many precautions to be taken that do not necessarily have to do with safety issues that remain the priority.

garments

Before even worrying about how to use your chainsaw, you need to be properly dressed. No area of the body should be discovered. We sell clothing specially designed for those who work with the chainsaw. These clothing items will not make you immune from cuts, but it is still protection. Wear a helmet with a visor to protect your eyes and safety shoes. Protect your hands with suitable gloves.

The tension of the chain

It is essential that the chain has adequate tension. If it is loose, it will end up falling from the bar with all the risks for things and people. Excessive tension is also not desirable as this leads to rapid wear and even the breaking of the bar. But how to understand when the tension is the ideal one? When the chain is in contact with the lower part of the guide bar without making it difficult to pull it with one hand.

Lubricate the chain

Chain lubrication is very important to slow down wear. Check the oil level often and top it up every time you put the fuel.

Take care of the bar.

Guide bar problems often occur. There are three main causes: incorrect chain tension, poor lubrication, and an approximate cutting technique. Since the area of the most worn bar is the lower one, invert it every time you change the chain, carefully and regularly clean the groove and the lubrication holes of the bar, and with a flat-file remove the burrs that may form.

The correct position

When handling a chainsaw, it is necessary to assume an adequate position: the tool must always be held firmly with both hands; the right grips the rear handle while the left grips the upper one. This also applies to left-handers. The tubular handle makes it grasped with the thumbs firmly.

Some precautions

Given that when working with the chainsaw, the attention must always be maximum. One must be even more cautious when the soil is wet, damp, or worse, with snow or ice. Maximum attention, even when working on slopes or, in any case, uneven ground. Remember that bark on the ground, roots, stumps, and things of this kind can potentially trip, and with a chainsaw, in your hands, it can be very dangerous. Always for your safety, avoid working alone, and in any case, make sure you are within reach of your partner.

Leave a Comment